Class “S” Spray/Scrubber

Category:

Description

The spray or spray/scrubber deaerator has a wide product range from 3,500 #/hr to 500,000 #/hr and higher. It is best used for fairly stable loads and constant water inlet temperatures. It is the most economically priced unit in the 7,000 #/hr and higher flow range.
In the spray type unit, water is sprayed into a pressurized steam atmosphere (first stage deaeration) in order to preheat and partially deaerate the incoming water. The water is then directed to the scrubber (second stage deaeration), where the water is violently scrubbed to remove the final traces of oxygen. The steam acts as a carrier gas, to expel the removed oxygen out the deaerator vent. The deaerated water is then ready for use by the boiler, at saturated temperature and with oxygen levels at .005 cc/liter.
Customization of the spray type deaerator is available in any configuration including:
• Vertical orientation
• Dual compartment (deaerator with attached surge tank)
• Single skid deaerator/surge packages in over/under or end-to-end arrangements

Contact us for any part inquiry

Main Office

Address: 2 Hudson Street, Sleepy Hollow, NY 10591

Tel: +(914) 332-0088

Fax: +(914) 332-9463

Email: info@mpnboilers.com

Website: https://mpnboilers.com

Long Island Office

Address: 1363 Lincoln Avenue, Unit 3, Holbrook, NY 11741

Tel: +(631) 253-2300

Fax: +(631) 253-0166

 

New York City Office

Address: 1501 Broadway, 12th Floor
New York, NY 10036

Tel: +(631) 847-2601

 

Quick Contact

FOR EMERGENCY SERVICE DIAL (914) 332-0099 24 HOURS A DAY – 7 DAYS A WEEK – 365 DAYS A YEAR