ASME DHW STOCK STORAGE TANKS, 235-534 GALLON

Description

Storage tanks are required in conjunction with WH water heaters. The heater provides rapid heating of a small volume of water; the tank provides a storage medium with enough capacity to handle short-term loads.
This separation of functions provides extremely fast, flexible recovery. Under ASME section IV part HLW rules, an ASME-compliant tank is required when the total system volume exceeds 120 gallons, or when the total heating capacity exceeds 200,000 BTUH. When properly selected and installed, these tanks can provide 80% draw without appreciable temperature decrease in a single-temperature application.

Features:

⦁ Sizes: 235, 335, 499, 534 gallons

⦁ ASME Compliant

⦁ 160 PSIG maximum working pressure

⦁ 11″ x 15″ Manhole

⦁ Two magnesium anodes* Glass-lined

⦁ Angle iron legs

⦁ 3 NPT connections for heater piping and tank outlet

⦁ Ports for T&P valve, tankstat, thermometer, and drain valve

⦁ Insulated with rigid foam at a minimum R value of 16